Jackson XML

Since Camel 2.16

Jackson XML is a Data Format which uses the Jackson library with the XMLMapper extension to unmarshal an XML payload into Java objects or to marshal Java objects into an XML payload.

If you are familiar with Jackson, this XML data format behaves in the same way as its JSON counterpart, and thus can be used with classes annotated for JSON serialization/deserialization.

This extension also mimics JAXB’s "Code first" approach.

This data format relies on Woodstox (especially for features like pretty printing), a fast and efficient XML processor.

from("activemq:My.Queue").
  unmarshal().jacksonXml().
  to("mqseries:Another.Queue");

JacksonXML Options

The Jackson XML dataformat supports 16 options, which are listed below.

Name Default Java Type Description

xmlMapper

String

Lookup and use the existing XmlMapper with the given id.

prettyPrint

false

Boolean

To enable pretty printing output nicely formatted. Is by default false.

unmarshalType

String

Class name of the java type to use when unmarshalling.

allowUnmarshallType

false

Boolean

If enabled then Jackson is allowed to attempt to use the CamelJacksonUnmarshalType header during the unmarshalling. This should only be enabled when desired to be used.

jsonView

String

When marshalling a POJO to JSON you might want to exclude certain fields from the JSON output. With Jackson you can use JSON views to accomplish this. This option is to refer to the class which has JsonView annotations.

include

String

If you want to marshal a pojo to JSON, and the pojo has some fields with null values. And you want to skip these null values, you can set this option to NON_NULL.

allowJmsType

false

Boolean

Used for JMS users to allow the JMSType header from the JMS spec to specify a FQN classname to use to unmarshal to.

collectionType

String

Refers to a custom collection type to lookup in the registry to use. This option should rarely be used, but allows to use different collection types than java.util.Collection based as default.

useList

false

Boolean

To unmarshal to a List of Map or a List of Pojo.

timezone

String

If set then Jackson will use the Timezone when marshalling/unmarshalling.

enableJaxbAnnotationModule

false

Boolean

Whether to enable the JAXB annotations module when using jackson. When enabled then JAXB annotations can be used by Jackson.

moduleClassNames

String

To use custom Jackson modules com.fasterxml.jackson.databind.Module specified as a String with FQN class names. Multiple classes can be separated by comma.

moduleRefs

String

To use custom Jackson modules referred from the Camel registry. Multiple modules can be separated by comma.

enableFeatures

String

Set of features to enable on the Jackson com.fasterxml.jackson.databind.ObjectMapper. The features should be a name that matches a enum from com.fasterxml.jackson.databind.SerializationFeature, com.fasterxml.jackson.databind.DeserializationFeature, or com.fasterxml.jackson.databind.MapperFeature Multiple features can be separated by comma.

disableFeatures

String

Set of features to disable on the Jackson com.fasterxml.jackson.databind.ObjectMapper. The features should be a name that matches a enum from com.fasterxml.jackson.databind.SerializationFeature, com.fasterxml.jackson.databind.DeserializationFeature, or com.fasterxml.jackson.databind.MapperFeature Multiple features can be separated by comma.

contentTypeHeader

true

Boolean

Whether the data format should set the Content-Type header with the type from the data format. For example application/xml for data formats marshalling to XML, or application/json for data formats marshalling to JSON.

Using Jackson XML in Spring DSL

When using Data Format in Spring DSL you need to declare the data formats first. This is done in the DataFormats XML tag.

        <dataFormats>
            <!-- here we define a Xml data format with the id jack and that it should use the TestPojo as the class type when
                 doing unmarshal. The unmarshalType is optional, if not provided Camel will use a Map as the type -->
            <jacksonXml id="jack" unmarshalType="org.apache.camel.component.jacksonxml.TestPojo"/>
        </dataFormats>

And then you can refer to this id in the route:

       <route>
            <from uri="direct:back"/>
            <unmarshal><custom ref="jack"/></unmarshal>
            <to uri="mock:reverse"/>
        </route>

Excluding POJO fields from marshalling

When marshalling a POJO to XML you might want to exclude certain fields from the XML output. With Jackson you can use JSON views to accomplish this. First create one or more marker classes.

Use the marker classes with the @JsonView annotation to include/exclude certain fields. The annotation also works on getters.

Finally use the Camel JacksonXMLDataFormat to marshall the above POJO to XML.

Note that the weight field is missing in the resulting XML:

<pojo age="30" weight="70"/>

Include/Exclude fields using the jsonView attribute with JacksonXMLDataFormat

As an example of using this attribute you can instead of:

JacksonXMLDataFormat ageViewFormat = new JacksonXMLDataFormat(TestPojoView.class, Views.Age.class);

from("direct:inPojoAgeView")
  .marshal(ageViewFormat);

Directly specify your JSON view inside the Java DSL as:

from("direct:inPojoAgeView")
  .marshal().jacksonXml(TestPojoView.class, Views.Age.class);

And the same in XML DSL:

<route>
<from uri="direct:inPojoAgeView"/>
    <marshal>
      <jacksonXml unmarshalType="org.apache.camel.component.jacksonxml.TestPojoView" jsonView="org.apache.camel.component.jacksonxml.Views$Age"/>
    </marshal>
</route>

Setting serialization include option

If you want to marshal a POJO to XML, and the POJO has some fields with null values. And you want to skip these null values, then you need to set either an annotation on the POJO,

@JsonInclude(Include.NON_NULL)
public class MyPojo {
   ...
}

But this requires you to include that annotation in your POJO source code. You can also configure the Camel JacksonXMLDataFormat to set the include option, as shown below:

JacksonXMLDataFormat format = new JacksonXMLDataFormat();
format.setInclude("NON_NULL");

Or from XML DSL you configure this as

<dataFormats>
  <jacksonXml id="jacksonxml" include="NON_NULL"/>
</dataFormats>

Unmarshalling from XML to POJO with dynamic class name

If you use jackson to unmarshal XML to POJO, then you can now specify a header in the message that indicate which class name to unmarshal to.
The header has key CamelJacksonUnmarshalType if that header is present in the message, then Jackson will use that as FQN for the POJO class to unmarshal the XML payload as.

 For JMS end users there is the JMSType header from the JMS spec that
indicates that also. To enable support for JMSType you would need to
turn that on, on the jackson data format as shown:
JacksonDataFormat format = new JacksonDataFormat();
format.setAllowJmsType(true);

Or from XML DSL you configure this as

<dataFormats>
  <jacksonXml id="jacksonxml" allowJmsType="true"/>
</dataFormats>

Unmarshalling from XML to List<Map> or List<POJO>

If you are using Jackson to unmarshal XML to a list of map/POJO, you can now specify this by setting useList="true" or use the org.apache.camel.component.jacksonxml.ListJacksonXMLDataFormat. For example with Java you can do as shown below:

JacksonXMLDataFormat format = new ListJacksonXMLDataFormat();
// or
JacksonXMLDataFormat format = new JacksonXMLDataFormat();
format.useList();
// and you can specify the POJO class type also
format.setUnmarshalType(MyPojo.class);

And if you use XML DSL then you configure to use list using useList attribute as shown below:

<dataFormats>
    <jacksonXml id="jack" useList="true"/>
</dataFormats>

And you can specify the POJO type also

<dataFormats>
    <jacksonXml id="jack" useList="true" unmarshalType="com.foo.MyPojo"/>
</dataFormats>

Using custom Jackson modules

You can use custom Jackson modules by specifying the class names of those using the moduleClassNames option as shown below.

<dataFormats>
    <jacksonXml id="jack" useList="true" unmarshalType="com.foo.MyPojo" moduleClassNames="com.foo.MyModule,com.foo.MyOtherModule"/>
</dataFormats>

When using moduleClassNames then the custom jackson modules are not configured, by created using default constructor and used as-is. If a custom module needs any custom configuration, then an instance of the module can be created and configured, and then use modulesRefs to refer to the module as shown below:

<bean id="myJacksonModule" class="com.foo.MyModule">
  ... // configure the module as you want
</bean>

<dataFormats>
    <jacksonXml id="jacksonxml" useList="true" unmarshalType="com.foo.MyPojo" moduleRefs="myJacksonModule"/>
</dataFormats>

Multiple modules can be specified separated by comma, such as moduleRefs="myJacksonModule,myOtherModule".

Enabling or disable features using Jackson

Jackson XML has a number of features you can enable or disable, which its XmlMapper uses. For example to disable failing on unknown properties when marshalling, you can configure this using the disableFeatures:

<dataFormats>
    <jacksonXml id="jacksonxml" unmarshalType="com.foo.MyPojo" disableFeatures="FAIL_ON_UNKNOWN_PROPERTIES"/>
</dataFormats>

You can disable multiple features by separating the values using comma. The values for the features must be the name of the enums from Jackson from the following enum classes:

  • com.fasterxml.jackson.databind.SerializationFeature

  • com.fasterxml.jackson.databind.DeserializationFeature

  • com.fasterxml.jackson.databind.MapperFeature

  • com.fasterxml.jackson.dataformat.xml.deser.FromXmlParser.Feature

To enable a feature use the enableFeatures options instead.

From Java code you can use the type safe methods from camel-jackson module:

JacksonDataFormat df = new JacksonDataFormat(MyPojo.class);
df.disableFeature(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES);
df.disableFeature(DeserializationFeature.FAIL_ON_NULL_FOR_PRIMITIVES);

Converting Maps to POJO using Jackson

Jackson XmlMapper can be used to convert maps to POJO objects. Jackson component comes with the data converter that can be used to convert java.util.Map instance to non-String, non-primitive and non-Number objects.

Map<String, Object> invoiceData = new HashMap<String, Object>();
invoiceData.put("netValue", 500);
producerTemplate.sendBody("direct:mapToInvoice", invoiceData);
...
// Later in the processor
Invoice invoice = exchange.getIn().getBody(Invoice.class);

If there is a single XmlMapper instance available in the Camel registry, it will used by the converter to perform the conversion. Otherwise the default mapper will be used.

Formatted XML marshalling (pretty-printing)

Using the prettyPrint option one can output a well formatted XML while marshalling:

<dataFormats>
    <jacksonXml id="jack" prettyPrint="true"/>
</dataFormats>

And in Java DSL:

from("direct:inPretty").marshal().jacksonXml(true);

Please note that there are 5 different overloaded jacksonXml() DSL methods which support the prettyPrint option in combination with other settings for unmarshalType, jsonView etc.

Dependencies

To use Jackson XML in your camel routes you need to add the dependency on camel-jacksonxml which implements this data format.

If you use maven you could just add the following to your pom.xml, substituting the version number for the latest & greatest release (see the download page for the latest versions).

<dependency>
  <groupId>org.apache.camel</groupId>
  <artifactId>camel-jacksonxml</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>