IRC

Since Camel 1.1

Both producer and consumer are supported

The IRC component implements an IRC (Internet Relay Chat) transport.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-irc</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The IRC component supports 4 options, which are listed below.

Name Description Default Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

Endpoint Options

The IRC endpoint is configured using URI syntax:

irc:hostname:port

with the following path and query parameters:

Path Parameters (2 parameters)

Name Description Default Type

hostname (common)

Required Hostname for the IRC chat server.

String

port (common)

Port number for the IRC chat server. If no port is configured then a default port of either 6667, 6668 or 6669 is used.

int

Query Parameters (27 parameters)

Name Description Default Type

autoRejoin (common)

Whether to auto re-join when being kicked.

true

boolean

channels (common)

Comma separated list of IRC channels.

String

commandTimeout (common)

Delay in milliseconds before sending commands after the connection is established.

5000

long

keys (common)

Comma separated list of keys for channels.

String

namesOnJoin (common)

Sends NAMES command to channel after joining it. onReply has to be true in order to process the result which will have the header value irc.num = '353'.

false

boolean

nickname (common)

The nickname used in chat.

String

persistent (common)

Deprecated Use persistent messages.

true

boolean

realname (common)

The IRC user’s actual name.

String

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

colors (advanced)

Whether or not the server supports color codes.

true

boolean

onJoin (filter)

Handle user join events.

true

boolean

onKick (filter)

Handle kick events.

true

boolean

onMode (filter)

Handle mode change events.

true

boolean

onNick (filter)

Handle nickname change events.

true

boolean

onPart (filter)

Handle user part events.

true

boolean

onPrivmsg (filter)

Handle private message events.

true

boolean

onQuit (filter)

Handle user quit events.

true

boolean

onReply (filter)

Whether or not to handle general responses to commands or informational messages.

false

boolean

onTopic (filter)

Handle topic change events.

true

boolean

nickPassword (security)

Your IRC server nickname password.

String

password (security)

The IRC server password.

String

sslContextParameters (security)

Used for configuring security using SSL. Reference to a org.apache.camel.support.jsse.SSLContextParameters in the Registry. This reference overrides any configured SSLContextParameters at the component level. Note that this setting overrides the trustManager option.

SSLContextParameters

trustManager (security)

The trust manager used to verify the SSL server’s certificate.

SSLTrustManager

username (security)

The IRC server user name.

String

Message Headers

The IRC component supports 10 message header(s), which is/are listed below:

Name Description Default Type

irc.messageType (common)

Constant: IRC_MESSAGE_TYPE

The type of message.

String

irc.target (common)

Constant: IRC_TARGET

The target.

String

irc.sendTo (common)

Constant: IRC_SEND_TO

The nickname or channel the message should be sent to.

String

irc.user.kicked (common)

Constant: IRC_USER_KICKED

The nickname of the user who is kicked from a channel (passive).

String

irc.user.host (common)

Constant: IRC_USER_HOST

The host of the person who sent the line.

String

irc.user.nick (common)

Constant: IRC_USER_NICK

The nickname of the person who sent the line or the server name of the server which sent the line.

String

irc.user.servername (common)

Constant: IRC_USER_SERVERNAME

The server name of the server which sent the line or the nickname of the person who sent the line.

String

irc.user.username (common)

Constant: IRC_USER_USERNAME

The username of the person who sent the line.

String

irc.num (common)

Constant: IRC_NUM

The numeric reply.

int

irc.value (common)

Constant: IRC_VALUE

The first part of the message.

String

SSL Support

Using the JSSE Configuration Utility

The IRC component supports SSL/TLS configuration through the Camel JSSE Configuration Utility. This utility greatly decreases the amount of component specific code you need to write and is configurable at the endpoint and component levels. The following examples demonstrate how to use the utility with the IRC component.

Programmatic configuration of the endpoint

KeyStoreParameters ksp = new KeyStoreParameters();
ksp.setResource("/users/home/server/truststore.jks");
ksp.setPassword("keystorePassword");

TrustManagersParameters tmp = new TrustManagersParameters();
tmp.setKeyStore(ksp);

SSLContextParameters scp = new SSLContextParameters();
scp.setTrustManagers(tmp);

Registry registry = ...
registry.bind("sslContextParameters", scp);

...

from(...)
    .to("ircs://camel-prd-user@server:6669/#camel-test?nickname=camel-prd&password=password&sslContextParameters=#sslContextParameters");

Spring DSL based configuration of endpoint

...
  <camel:sslContextParameters
      id="sslContextParameters">
    <camel:trustManagers>
      <camel:keyStore
          resource="/users/home/server/truststore.jks"
          password="keystorePassword"/>
    </camel:keyManagers>
  </camel:sslContextParameters>...
...
  <to uri="ircs://camel-prd-user@server:6669/#camel-test?nickname=camel-prd&password=password&sslContextParameters=#sslContextParameters"/>...

Using the legacy basic configuration options

You can also connect to an SSL enabled IRC server, as follows:

ircs:host[:port]/#room?username=user&password=pass

By default, the IRC transport uses SSLDefaultTrustManager. If you need to provide your own custom trust manager, use the trustManager parameter as follows:

ircs:host[:port]/#room?username=user&password=pass&trustManager=#referenceToMyTrustManagerBean

Using keys

Some irc rooms requires you to provide a key to be able to join that channel. The key is just a secret word.

For example we join 3 channels where as only channel 1 and 3 uses a key.

irc:nick@irc.server.org?channels=#chan1,#chan2,#chan3&keys=chan1Key,,chan3key

Getting a list of users of the channel

Using the namesOnJoin option one can invoke the IRC-NAMES command after the component has joined a channel. The server will reply with irc.num = 353. So in order to process the result the property onReply has to be true. Furthermore one has to filter the onReply exchanges in order to get the names.

For example we want to get all exchanges that contain the usernames of the channel:

from("ircs:nick@myserver:1234/#mychannelname?namesOnJoin=true&onReply=true")
	.choice()
		.when(header("irc.messageType").isEqualToIgnoreCase("REPLY"))
			.filter(header("irc.num").isEqualTo("353"))
			.to("mock:result").stop();

Sending to different channel or a person

If you need to send messages to a different channel (or a person) which is not defined on IRC endpoint, you can specify a different destination in a message header.

You can specify the destination in the following header:

Header Type Description

irc.sendTo

String

The channel (or the person) name.